====== Debian on SDF VPS ======

===== Contents =====

  * [[#Basics]]
  * [[#Set your Timezone]]
  * [[#Networking]]
  * [[#Setting up SSH]]
  * [[#Package Management]]
  * [[#Firewall Setup]]
  * [[#Software and Distribution Updating]]
  * [[#Reducing Memory Usage]]

===== Basics =====

Upon logging in to your VPS for the first time, one of the first things you will want to do is change the default root password by typing "passwd" at the prompt. Don't forget this password as there is currently no way to recover it.

Additionally, the debian build comes with a generic account called 'testuser' that has a password of 'testuser'. This is a major security concern, so before you put your system online, you should either change the password, or even better, delete the account all together.\\  To change the password:

  passwd testuser

To delete the account:

  userdel testuser

It is a good habit to create a regular user account for working, using "su" to obtain root privileges as needed. To create a regular user account:

  useradd -m <username>

This user will be able to perform administrative tasks by runing "su" to obtain superuser privileges using the root password.

===== Set Your Timezone =====

  dpkg-reconfigure tzdata

===== Networking =====

In your control panel at vps.sdf.org, note YOUR_IP (e.g. 192.94.73.255) on the top line, and YOUR_HOSTNAME (e.g. debian99).

Start your server, and log in via the console. (default= root:root)

Open /etc/network/interfaces in an editor and add the following, replacing the text YOUR_IP with your own actual IP number, add:

  auto eth0
  iface eth0 inet static
  address YOUR_IP
  netmask 255.255.255.0
  network 192.94.73.0
  broadcast 192.94.73.255
  gateway 192.94.73.1
  dns-nameservers 192.94.73.20

Add this to /etc/hosts:

  YOUR_IP 	YOUR_HOSTNAME.sdf.org 	YOUR_HOSTNAME

Change /etc/hostname to:

  YOUR_HOSTNAME

Run/Type:

  /etc/init.d/networking restart

===== Setting up SSH =====

You may wish to add ssh access to your VPS. It is **//highly//** recommended that you disable root login via ssh and use a normal user account to login.

==== Install SSH ====

Run/Type:

  apt-get install openssh-server

==== Disable root Login ====

Edit ///etc/ssh/sshd_config// and change the line:

  PermitRootLogin yes

To:

  PermitRootLogin no

Now restart sshd by running/typing:

  /etc/init.d/ssh restart

You can now test ssh by running "ssh user@localhost".

===== Package Management =====

Refer to the following article to see how to clean up (remove packages) from your VPS:

  * [[http://www.debian-administration.org/articles/462|Cleaning up a Debian GNU/Linux system]]

===== Firewall Setup =====

Disable IPv6:

  # echo "blacklist ipv6" >> /etc/modprobe.d/blacklist

Edit rules:

  # vi /etc/firewall

<code>
  *filter

  -A INPUT -i lo -j ACCEPT
  -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT

  -A OUTPUT -j ACCEPT
  -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

  -A INPUT -p tcp --dport 80 -j ACCEPT
  -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT

  -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT

  -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7

  -A INPUT -j REJECT
  -A FORWARD -j REJECT

  COMMIT
</code>

Load rules (now):

  # iptables -F
  # iptables-restore < /etc/firewall

Load rules (boot):

  # vi /etc/network/if-pre-up.d/firewall

  #!/bin/sh
  /sbin/iptables-restore < /etc/firewall

  # chmod 755 /etc/network/if-pre-up.d/firewall
  
===== Software and Distribution Updating =====

To update your system, run the following commands:
  apt-get update
  apt-get dist-upgrade -y 
  
===== Reducing Memory Usage=====

If you are using a 128MB slice, it's a good idea to reduce the memory usage of some processes or even disable them.

=== cron and at ===
You might not need one or both of those, so you can deactivate them with

  # update-rc.d -f atd remove
  # update-rc.d -f cron remove

This frees up ca. 7MB (if both are deactivated).

=== getty / virtual terminals ===
This being a virtual system, you won't need getty on tty1-6. In order to eliminate them, edit /etc/inittab and modify the corresponding lines like this:

  co:2345:respawn:/sbin/getty hvc0 9600 linux

  #1:2345:respawn:/sbin/getty 38400 tty1
  #2:23:respawn:/sbin/getty 38400 tty2
  #3:23:respawn:/sbin/getty 38400 tty3
  #4:23:respawn:/sbin/getty 38400 tty4
  #5:23:respawn:/sbin/getty 38400 tty5
  #6:23:respawn:/sbin/getty 38400 tty6

You need to keep the line with hvc0 so you can attach a serial console from vps.sdf.org to your vps. This frees up ca. 10MB. 

=== rsyslogd ===
rsyslogd eats a lot of memory by default (26MB on my vps) which can be reduced by the usage of ulimit. Edit /etc/init.d/rsyslog and include the following line just before the command where rsyslogd will be started:

  ulimit -s 256

Example:

<code>
case "$1" in
  start)
        ulimit -s 256
        log_daemon_msg "Starting $DESC" "$RSYSLOGD"
        create_xconsole
        do_start
        case "$?" in
                0) sendsigs_omit
                   log_end_msg 0 ;;
                1) log_progress_msg "already started"
                   log_end_msg 0 ;;
                *) log_end_msg 1 ;;
        esac

        ;;
</code>
This frees up about 23MB. 

=== portmap ===
I don't need portmap, so i removed it completely:

  apt-get remove --purge portmap

=== openssh vs. dropbear ===
If you dont need all the extra features openssh has compared to dropbear, you can reduce memory consumption from 23MB to 5MB while being connected with 1 non-root user to the system by replacing openssh with dropbear.

  apt-get install dropbear

Edit /etc/defaults/dropbear and set NO_START to 0 and add the extra args "-w -s -g" to disallow root and password logins (You'll be only able to login with a non root user and ssh keys):
<code>
# disabled because OpenSSH is installed
# change to NO_START=0 to enable Dropbear
NO_START=0

# the TCP port that Dropbear listens on
DROPBEAR_PORT=22

# any additional arguments for Dropbear
DROPBEAR_EXTRA_ARGS="-w -s -g"

# specify an optional banner file containing a message to be
# sent to clients before they connect, such as "/etc/issue.net"
DROPBEAR_BANNER=""

# RSA hostkey file (default: /etc/dropbear/dropbear_rsa_host_key)
#DROPBEAR_RSAKEY="/etc/dropbear/dropbear_rsa_host_key"

# DSS hostkey file (default: /etc/dropbear/dropbear_dss_host_key)
#DROPBEAR_DSSKEY="/etc/dropbear/dropbear_dss_host_key"

# Receive window size - this is a tradeoff between memory and
# network performance
DROPBEAR_RECEIVE_WINDOW=65536
</code>

Afterwards, you can deactivate openssh with

  update-rc.d ssh remove

or uninstall it: 

  apt-get remove openssh-server