Gopher

What is Gopher?

From: http://en.wikipedia.org/wiki/Gopher_(protocol)

The Gopher protocol is a TCP/IP Application layer protocol designed for distributing, searching, and retrieving documents over the Internet […]. The protocol offers some features not natively supported by the Web and imposes a much stronger hierarchy on information stored on it.

You can find more info here:

Creating your Gopherspace

You can use the command “mkgopher” (after you run it, type “setup” in the line “MKGOPHER>”; you can type “help” for more details) to create a directory in your $HOME called gopher (This directory is a link to /ftp/pub/users/$USER/ ). On it, you can put all the files you want to be available in your Gopherspace.

You can use mkgopher to publish documents, create directories, etc. You can also manage your Gopherspace manually. If you decide to do so, remember that the server needs the right permissions to be able to read your content. That is, files need to be group readable (chmod g+r $HOME/gopher/yourfile), directories need also to be group executable (chmod g+rx $HOME/gopher/yourdir), etc.

Gophermap

Say that you have “file1.txt”, “file2.pdf”, “file3.rtf” and “dir” in your Gopherspace (dir is a directory). That is,

  $ ls -lF
  drwxr-x---  2 $USER  nobody  512 Dec  2 10:15 dir/
  -rw-r-----  1 $USER  nobody    6 Dec  2 10:14 file1.txt
  -rw-r-----  1 $USER  nobody    6 Dec  2 10:14 file2.pdf
  -rw-r-----  1 $USER  nobody    6 Dec  2 10:14 file3.rtf

When you visit it, if there is no file named gophermap (yes, this file has no extension) you'll see a list of the files and the directory, like this:

  ,,,                                                                 Gopher Menu
                                    Gopher Menu

   (DIR) dir
  (FILE) file1.txt
  (FILE) file2.pdf
  (FILE) file3.rtf

If there is a gophermap file, the server will parse it and will present the content as you specified in gophermap.

The gophermap syntax is:

XSome text here<TAB>/path/to/content<TAB>example.org<TAB>N

where the first character (X in the example) is an itemtype (more below), “Some text here” is the text that you want to be displayed, <TAB> is a tab character, ”/path/to/content” is the location of the content, “example.org” is the server where the content is located and the last character (N in the example) is the server port (usually it's 70). Content after the second <TAB> is optional if you are linking to content in your Gopherspace.

The itemtype is one of these characters:

Itemtype Content
0 Text file
1 Directory
2 CSO name server
3 Error
4 Mac HQX filer
5 PC binary
6 UNIX uuencoded file
7 Search server
8 Telnet Session
9 Binary File
c Calendar (not in 2.06)
e Event (not in 2.06)
g GIF image
h HTML, Hypertext Markup Language
i “inline” text type
s Sound
I Image (other than GIF)
M MIME multipart/mixed message
T TN3270 Session/

Gophermap example

OK, let's say that you want to display a welcome message, a description for “file1.txt”, “file2.pdf” and “dir”, a link to an external server, a link to an http URL. Your gophermap should be like this:

  Welcome to my Gopherspace!

  0My text file	file1.txt
  9My pdf file	file2.pdf
  1My dir	dir
0Why is Gopher Still Relevant?	/gopher/relevance.txt	gopher.floodgap.com	70
hAn http link	URL:http://sdf.lonestar.org/

Remember the gophermap syntax? Then be careful about tab characters. In the example above, there are some <TAB>s. For instance, the third line is

0My text file<TAB>file1.txt

while the seventh is

0Why is Gopher Still Relevant?<TAB>/gopher/relevance.txt<TAB>gopher.floodgap.com<TAB>70

How come the pdf file has an itemtype 9? Well, not every kind of file has its own itemtype, so you can use one that makes more sense.

Even if you don't need a blank line as the second line of your document, you can find this useful as there is a known Lynx bug that makes it display the second line together with the first (you can find a patch for this here: gopher://sdf.lonestar.org/0/users/bulibuta/openbsd/patches/lynx-gopher-newline.patch).

This is (more or less) the output you'll see if you use a gophermap like the one in the example above:

  ,,,                                                                 Gopher Menu
                                    Gopher Menu

         Welcome to my Gopherspace!

  (FILE) My text file
   (BIN) My pdf file
   (DIR) My dir

  (FILE) Why is Gopher Still Relevant?
  (HTML) An http link

Gopher log

A gopher log (“glog” or “phlog”) is similar to a blog, but on gopherspace. You can create your phlog and add it to the phlogosphere.

Maintaining a glog consists basically (but not necessarily) in creating an entry (in your log directory) and modifying your phlog gophermap so that the new entry is displayed with its creation date. Here is a script that you can run on SDF-EU called mkgopherentry that will allow you to do exactly that. It will also extract the first paragraph from the entry and will add it on the gophermap with a “Continued…” link that will point to the full post.

#!/bin/ksh
 
# TODO:
#       - make the script runable from any directory (GOPHERBLOG variable?)
#       - if no text file, fetch it from stdin
#       - check for 1st, 2nd and 3rd of the month and adjust the date prefix
#       - add a full interactive mode?
 
if [[ -z $1 ]] || [[ -z $2 ]]; then
        echo "USAGE: mkgopherentry title textfile"
        exit 1
fi
 
intro=`cat $2 | awk 'BEGIN { N = 0} /^$/ {N = 1} {if (N == 0) print;}'`
 
# Create an entry.
cat >>gophermap.tmp<<EOF
--$1--
    `date "+%A, %B %dth, %Y"`
$intro
0Continued...   $2
 
EOF
 
# Add the old ones to its tail.
if [[ -f gophermap ]]; then
        cat gophermap >> gophermap.tmp
fi
mv gophermap.tmp gophermap
chmod 640 gophermap $2

Creating an entry is as simple as typing (without the quotes):

“mkgopherentry title textfile”

where the 2 arguments are self-explaining.

Say that you have two entries in your diary. If you use “mkgopherentry”, they will appear like:

  --This is my second post!--
      Tuesday, December 01th, 2009
  Lorem ipsum dolor sit amet, consectetur adipiscing elit.
  Cras eros turpis, tristique semper aliquet sit amet,
  hendrerit vel enim. Integer pulvinar leo in dolor posuere
  blandit.
  Continued...

  --First post--
      Monday, November 30th, 2009
  First entry in my gopher log at SDF.
  Continued...

Other glog/phlog software

There is some software authored by SDF/SDF-EU members that you could find useful if you want to maintain a gopher log.

You can find more information in the Glogging/Phlogging section at gopher://sdf.lonestar.org/1/users/wt/soft/gopher.

Dynamic content (moles)

The server used by SDF-EU (bucktooth) is able to serve moles. A mole is an executable (by the server) file with extension cgi that are similar to CGIs. This means that you can write a script, that the server will execute and it will present the data that your mole dumps to standard output. With moles you don't have to declare a content type header. Moles get arguments from the address used to access the document and can be accessed with whatever itemtype makes sense for the kind of output the mole generates.

You can code moles with the language(s) you are comfortable and can use on SDF-EU. Below we will see some examples using shell scripts.

Mole examples

Remember that your moles need to be executable (and readable) by the server. So, you will have to do: “chmod 750 YOURSCRIPT.cgi”

cal.cgi

The following example will generate a calendar starting weeks on Monday:

#!/bin/sh
cal -d 1

Easy enough, isn't it? As it is raw text, you can access it using an itemtype = 0, that is: gopher://sdfeu.org/0/users/YOUR-USERNAME/cal.cgi

Notice that other similar commands need to be called with a full path. That's because the server's path is PATH=/sbin:/bin:/usr/sbin:/usr/bin. That means that if you call a program without a path, the server will search in /sbin, /bin, /usr/sbin and /usr/bin. Eventually, you can add a path of your choice with, e.g., “PATH=$PATH:/usr/pkg/games”).

ls.cgi

The following example will generate a list of files on a specified directory. It will be possible to sort the content alphabetically or by modification time, based on how you access the script.

  #!/bin/sh
 
  directory=/ftp/pub/users/YOUR-USERNAME
  rel_dir=/users/YOUR-USERNAME
  server=sdfeu.org
  port=70
 
  # The internal field separator is set to be a newline
  IFS='
  '
 
  if [ -n "$1" -a "$1" = 'date' ] ; then
      ls_arg=t
  fi
 
  for i in $(ls -l${ls_arg} $directory) ; do
 
      content=$(echo "$i" | awk '{ print $9}')
      date=$(echo "$i" | awk '{ print $6,$7,$8}')
 
      if [ -z "$content" ] ; then
          continue
      fi
 
      if [ -d $directory/$i ] ; then
          itemtype=1
      else
          itemtype=0
      fi
 
      echo "$itemtype$content ($date) $rel_dir    $server $port"
  done

Note that the echo… line is
” echo “$itemtype$content ($date)<TAB>$rel_dir<TAB>$server<TAB>$port” ”

If you go to gopher://sdfeu.org/1/users/YOUR-USERNAME/ls.cgi , you will see a list of your files sorted alphabetically. If you access your mole as gopher://sdfeu.org/1/users/YOUR-USERNAME/ls.cgi?date , then you'll see your files/directories sorted by modification time.

figlet.cgi

You can add some interactivity by using the itemtype 7. This itemtype is intended to make it possible to type some characters in a search field in your browser. However, you can use it to make it possible to pass arguments to your scripts. The following example will use the text you type in the search field and will pass it through the program figlet.

  #!/bin/sh
 
  IFS='
  '
 
  for line in $(/usr/pkg/bin/figlet "$@") ; do
      echo "i$line"  # This is itemtype=i + text
  done

When you access the script via gopher://sdfeu.org/7/users/YOUR-USERNAME/figlet.cgi , your browser will ask you to input some text (the way it ask depends on the browser), then it will show your text as figlet transforms it.

The i in the echo… line is important here. Indeed, the document is being accessed with an itemtype 7 (but the same applies for itemtype 1), so the document should be structured similarly to gophermaps. It's not a gophermap, though. That's why you need to explicitily state the line should be displayed as simple (or inline) text.

Caveat

Besides what was said in the last paragraph of the figlet.cgi example, there's also another thing to stress. In that example (as with anything that will be served as a virtual directory (or with an itemtype 1 or 7), content won't be displayed if you access your script via floodgap proxy (and maybe others). In this case you will need to format the output of your script. Luckily this is very easy. For instance, in the figlet.cgi example you will need to modify the echo … line this way:

echo "i$i<TAB><TAB>error.host<TAB>1"

where <TAB> is a tab character (you should already know this!) and error.host and 1 are, respectively, a fake server and port number (you could also have written fake instead of error.host and 300 instead of 1).